Design of an IoT-Based Structural Health Monitoring System and Its Field Application on Laboratory Columns
DOI:
https://doi.org/10.54691/ecdgcv44Keywords:
Internet of Things; Structural Health Monitoring; Field Monitoring Data; Statistical Test; Safety Early Warning.Abstract
To address the limitation of manual inspection in achieving real-time, continuous and low-latency perception of structural conditions, an IoT-based structural health monitoring (SHM) system was designed and implemented. The system adopts a four-tier "perception-transmission-platform-application" architecture and relies on an engineering IoT monitoring platform and WH-series sensors to continuously and automatically monitor three categories of structural deformation: cracks, tilt and strain. To verify the effectiveness of the system, 27 measurement points (14 strain, 4 crack and 9 tilt) were deployed on laboratory columns of a university structural laboratory, and continuous monitoring was carried out for about 8.5 months (December 2025 to August 2026), yielding 24710 crack records, 55832 tilt records and 86181 strain records after removal of offline outliers. The results show that: (1) the crack widths remained stable month by month (monthly means of 9.53-9.66 mm), while an obvious anomalous evolution occurred at crack point-3 during 26 April to 7 June 2026 with a peak width of 25.04 mm, which was successfully identified by the system; (2) the mean tilt angles of the 9 tilt points ranged from -2.48° to +2.52° in the X direction and from -0.38° to +1.93° in the Y direction, indicating that the overall tilt state of the structure was safe; (3) the single-step changes of most strain points were concentrated within ±0.5 με, but 1453 sudden-change events exceeding ±200 με occurred at strain point-4, indicating a risk of local abrupt stress variation. Shapiro-Wilk and non-parametric tests confirmed that all the above differences were statistically significant. The tiered early-warning mechanism and typical anomaly cases demonstrate that the proposed system can support automatic structural health monitoring and early anomaly detection, and has practical engineering value.
Downloads
References
[1] Tang, D. Y., Wei, X. B., Sun, Z. H., et al. (2023). Review of structural health monitoring systems. Intelligent Building and Smart City, (8), 6–11. (in Chinese)
[2] Jiao, K., Lai, H. L., Peng, Z. X., et al. (2021). Research on key technologies of an IoT-based life-cycle safety operation service system for existing buildings. Industrial Construction, 51(10), 201–210. (in Chinese)
[3] Bai, B., Chen, Y., Du, C. Q., et al. (2020). Intelligent safety monitoring building information model based on IoT technology. Industrial Construction, 50(4), 175–179. (in Chinese)
[4] Luo, Y. Z., & Zhao, J. Y. (2022). Research status and prospects of structural health monitoring of spatial structures. Journal of Building Structures, 43(10), 16–28. (in Chinese)
[5] Tokognon, C. A., Gao, B., Tian, G. Y., et al. (2017). Structural health monitoring framework based on internet of things: a survey. IEEE Internet of Things Journal, 4(3), 619–635. https://doi.org/10.1109/JIOT.2017.2688518.
[6] Liu, Y. F., Qi, Y., Li, B. L., et al. (2022). Intelligent identification of sensitive service indices for multi-scenario structural operation and maintenance. Journal of Building Structures, 43(10), 1–15. (in Chinese)
[7] Li, H. M., Wang, J., & Yan, K. (2023). Evaluation method of spatial structural health state based on multi-sensor data fusion. Journal of Building Structures, 44(S1), 364–371. (in Chinese)
[8] Yue, Q. R., Liu, X. G., & Chen, H. B. (2022). Research and application progress of intelligent diagnosis for structural service safety. Journal of Building Structures, 43(10), 41–49. (in Chinese)
[9] Ou, J. P. (2005). Research and application of intelligent sensor networks and health monitoring systems for major engineering structures. Bulletin of National Natural Science Foundation of China, 19(1), 8–12. (in Chinese)
[10] Deng, N. C., Ou, J. P., Zhou, Z., et al. (2007). Application of fiber Bragg gratings in stress monitoring of prestressed steel strands. Journal of Harbin Institute of Technology, 39(10), 1550–1553. (in Chinese)
[11] Yang, Y., Wang, Z. W., Ling, Y., et al. (2023). Damage identification of frame structures based on statistical moment theory and Bayesian method. Journal of Building Structures, 44(2), 217–226. (in Chinese)
Downloads
Published
Issue
Section
License
Copyright (c) 2026 Scientific Journal of Technology

This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.






